Welcome to Ruian Haoyu Machinery Co.,Ltd
24-Hour Hour Hotline
+86-0577-65165266
+86-13958857367
Ruian Haoyu Machinery Co.,Ltd > Case > Coating machine >

Release film coating machine engineering case

source:未知editor:editor:adminHot: Publication time :2017-12-14 17:10

TB-1300silicone oil/release film coating machine:

main technical parameters:

moedel

TB-1300Type

coating method

anilox roller with uniformity roller 

coating width

1300mm

unwinding dia.

φ800mm

rewinding dia.

φ800mm

oven length

28m

coating speed

20-150m/min(depending to material)

machine speed

180m/min

overall machine dimension

31.5m×3.1m×4.4m

machine weight

about 20T

heating method

electrical heating

1.overall machine adopt 4frequency motor control,the tension auto-control,keep the speed synchronous.
2.unwinding frame independently,adopt frequency motor inverter control tension.
3.gravure roller coating method:blade shaft adopt heavy double shafts machine swing independetly,blade adjustment is manual with pneumatic type,angel adjust freely,coating thickness depending to the gravure roll mesh,different coating quantity need change different mesh rollers,
4.oven is 28m for 7sections independently control temperature,heating method is electrical heating hot air intake dry system,heater outside setup,heating pipe adopt stainless steel heating sink,can adjustment inner cycle inhale and exhaust air device.Intake and out with strong wind,dry thoroughly.
5.oven inner guide wheel synchronous with main machine,drive adopt synchronous belt drive type,reduce material stretch and deformation,cylinder pneumatic open oven and film pass operation panel so that worker can work very easily.
6.The tension between coating roller and traction steel roller adopt float swing arm by PLC auto-control.

7.auto-length and speed meter device
8.webguide adopt EPC air sensitive register to assure the trimness when rewinding .
9.unwinding and rewinding adopt key type air shaft,in order to loading and unloading easily.
10.high presicion up press traction device, steel roller cooling adopt water cycle to make the film surface more smooth and neat. to reach good cooling effect.

 

 

coating machine can customize according to customers' requests:

A According to the different requirements of the customers special the customized machine (limited width of 300-2500mm)
B rewinding and unwinding frame : manual lift up type single station, hydraulic lift type single station, electrical rotation double station, electrical chain climbing type double station, electrical rotation wheel pan type double station can be choosed by customer
C oven heating method: electric heating, conduction oil heating, steam heating etc can be choosed by customer
D coating method: gravure roller coating, double rollers coating, three rollers coating, five rollers coating, comma blade coating, air knife coating etc can be choosed by customer
E work speed is proportion with coating material quality, coating thickness, oven length, 
drying temperature




  Through the above understanding, you should have a more understanding of coating machine, laminating machine, gravure printing press, Slitter, if you have other questions, you may contact our online customer service:+86-13958857367
 
下一篇:没有了 上一篇:wax coating machine engineering case
keywords:Off type film coating machine

Recommendation scheme

TB-1600 Protective film coating machine
TB-1600 Protective film coating machine

产品特点:胶带保护膜涂布机产品介绍: 一、用途 该机引进国外先进涂布机技术结合自身多年生产涂布机经验综合而成,本机采用网纹涂布功能,用于

TB-1300 Release paper/silicone oil coati
TB-1300 Release paper/silicone oil coati

产品特点:TB-1300硅油离型膜、离型纸 涂布机 产品介绍: 主要技术参数 型号 TB-1300型 涂布方式 网纹带匀胶辊涂布 涂布宽度 1300mm 放卷直径 8 0

QFJ1100-1800B type release paper/release
QFJ1100-1800B type release paper/release

产品特点:QFJ1100-1800B型离型纸、薄膜卷材非标分切机产品详情: 最大原料宽度 1100-1800mm 收卷最大直径 600mm(特殊定做) 最大原料直径 1000mm

FQ-2000mm slitting machine
FQ-2000mm slitting machine

产品特点:2000型 表面收卷分切机 产品详情: 1、自动计米装置。 2、收放轴采用键子式、瓦片式气胀轴,装卸料操作方便。 3、收卷基材卸料采用卸料

FJ-800 wallpaper,film rewinder machine
FJ-800 wallpaper,film rewinder machine

产品特点:800MM小型墙纸复卷机、薄膜复卷机、礼品纸复卷机产品详情: 技术参数 型号 8 00mm 最大宽度 8 00mm 最大卷径 直径 600mm 最大承受重量

TB-1300 High temperature resistance stea
TB-1300 High temperature resistance stea

产品特点:耐高温蒸笼纸产品涂布机产品详情: 广泛适用于涂水性硅油生产蒸笼纸、烧烤纸、铝箔纸、锡箔纸等产品。 主要技术参数 (非标涂布机,参

Ranking of similar articles

Latest information articles

National free service hotline

+86-0577-65165266

MS.Sala +86-13958857367

Online Service